Hybrid Racing A2 K-Swap Shifter & Shifter Cable Combo

Hybrid Racing A2 K-Series Swap Bolt-In Short Shifter (HYB-SAS-01-06)

In 2008 we set out to solve one of the largest headaches that K-Series swaps presented. What do you do about the OEM RSX plastic shifter? Well, after a few months of designing and prototyping, we created the very first Bolt-In K-Series swap shifter. Nearly ten years and thousands of shifters later, we have the latest evolution of our innovative design.

The Hybrid Racing Bolt-In K-Swap shifter allows you to retain the stock center console in your EF, EG, EK, & DC chassis and only requires two small holes to be drilled. It works with both stock DC5 shifter cables and the Hybrid Racing race cables. Our shifter has been race tested in cars all over the world. From California to England to Japan, racers all around the world choose our shifter not only for its reliability but for its ease of install and adjustability.

The front/back throw can be adjusted to 3 different settings (100% stock throw, 75% stock throw, and 50% stock throw). The left/right throw can also be adjusted to 3 different settings (again, 100% stock throw, 75% stock throw, and 50% stock throw). The shift knob can be adjusted to up to 3 inches vertically, and the aluminum offset block can be rotated 360*. 

Hybrid Racing Performance Shifter Cables K Swap (HYB-SCA-01-07)

The Hybrid Racing cables are a performance upgrade replacement for stock OEM cables, except these specially designed cables are shorter than OE RSX cables for better K Swap fitment. The solid rod ends, 30% thicker cable core and spherical bearings give the Hybrid Racing cables a firmer, tighter feel over OEM cables resulting in fewer missed shifts and a more connected feel to the chassis.

We created a cable to give people peace of mind and improved driving performance when they shift hard and during demanding racing applications. The Hybrid Racing performance cables achieve this goal!

Other notable features of the Hybrid Racing cables are spherical bearings, stainless steel push rods, and upgraded stainless steel swivel support tubes (OEM are plastic) known to break on the OEM cables. All of the rod ends, and mounting bushings are CNC machined 6061 aluminum that have been heat-treated and coated with a black hard anodized before being laser etched with the Hybrid Racing logo and flair.

Additional K-Swap notes:

If you are using the Hybrid Racing cables on an OEM-style shifter mounted to a Karcepts adapter plate in a K-Swap chassis, you will need to widen the hole for the cable that is controlled by the front/back motion of the shifter where it goes through the Karcepts adapter plate. The hole needs to be widened to approximately 3/4" diameter. A stepped drill bit works well for doing this.

What is included with these shifter cables?

Aside from 2 shifter cables, each shifter cable set includes 4 cotter pins and an "m" bracket for affixing the shifter cables to the chassis in K swap applications. In addition, all shifter cable sets come with upgraded transmission gear selector springs. These aren't required but are recommended.