Product images 1 / 11
Description
Haltech Nexus R3 Vehicle Control Unit (VCU)
This is the brain we're building our new car around. The Haltech Nexus R3 is the VCU going into Hybrid Racing's new Honda Accord Gridlife GT car, the machine replacing the Super Touring Civic that Eric Kutil has been campaigning, and it's running alongside a host of other Haltech components in that build. When you're wiring a ground-up race car, you get very honest very fast about what actually survives a season of being thrashed, heat-cycled, and vibrated on track, and the R3 is what we chose to sit at the center of it. So this isn't a spec sheet we're reading off a box; it's the hardware we're trusting with our own program.
Here's why it earned that spot. A traditional standalone setup is really several boxes, the ECU, a separate power distribution module or a tangle of fuses and relays, a standalone wideband controller, and a data logger, all tied together with a harness that gets more complex and more failure-prone with every connection. The Nexus R3 collapses all of that into one sealed unit: engine management, a power distribution module (PDM), a wideband controller, and a 128MB data logger in a single box. On a race car that means fewer boxes, a dramatically cleaner harness, and fewer connections to shake loose when it matters most. That's not a marketing line, it's the single biggest reason it's going in our Accord.
Why the PDM Integration Matters
The power distribution side is what makes this a VCU and not just an ECU. Instead of running fuses and mechanical relays to power your injectors, coils, fuel pump, fans, and solenoids, the R3 drives those loads directly through programmable solid-state outputs, including four 25A push-pull PWM-capable outputs. You control, current-limit, and protect every circuit in software instead of with a fuse box, log the current each one draws, and have the system react intelligently to a fault. In practice that's the difference between a blown fuse ending your weekend and the car flagging the problem and protecting the hardware before it lets go. It's engineered for engines up to 8 cylinders or 4 rotors, so it covers everything from a four-cylinder time-attack car to a big V8 or a rotary.
Inputs and Outputs
- 4 x 25A (continuous) push-pull PWM-capable (5 kHz) outputs, for power to injectors/coils, transbrake, thermofan, or fuel pump
- 8 x peak/hold injector drivers (usable as low-side drive outputs)
- 8 x low-current ignition outputs (usable as low-side drive outputs)
- 6 x low-side drive outputs, PWM capable (DPOs)
- 6 x push-pull / H-bridge outputs (8A, PWM capable), e.g. for electronic throttle
- 11 x 0-5V analog inputs with redundancy for electronic throttle and switchable 5V pullup
- Trigger and home inputs with differential inputs, adjustable thresholds, and glitch filters
- 6 x synchronous pulsed inputs (zero-crossing or adjustable thresholds) for cam sensors, frequency inputs, or 0-5V analog inputs
- 1 x on-board wideband controller, supporting NTK and LSU 4.9 sensors
- 1 x on-board 4-bar MAP sensor
- 2 x CAN ports with switchable termination
- On-board data logging: up to 300 channels at sample rates up to 1ms (1kHz) with 128MB internal memory
Race and Tuning Features (via NSP)
The R3 is configured through Haltech's NSP (Nexus Software Programmer), which opens up a full motorsport feature set on a 32x32x8 4D tuning resolution:
- 4D closed-loop boost control and dual closed-loop O2 control
- Launch control, anti-lag, and rolling anti-lag
- Traction control and advanced torque management (driveshaft and engine RPM targeting)
- Flat-shift and trans-brake control
- Dual knock control
- Up to 6-stage nitrous control
- Multi-stage fuel injection and flex fuel
- Up to 4-sensor variable cam control
- Rotational idle, intake air bleed control, and stepper motor control
- CO2 control, race timer, and shock travel / ride height control
- Multi-level engine protection and up to 4D long-term learning
Automatic Transmission Control
The R3 can run popular automatic transmissions directly, including the Ford AODE / 4R70W, GM 4L60E and 4L80E, and Toyota A340E, among others. That lets you manage shifting, line pressure, and torque converter lockup from the same unit controlling the engine, which is a big deal for drag and street/strip builds running an automatic behind a standalone.
Connectivity and Logging
Built-in Wi-Fi lets you set up, monitor, and pull data wirelessly, and it's compatible with the Haltech Connect app, so you're not tethering an external device to the car to see what's going on. The 128MB of onboard logging captures up to 300 channels at up to 1kHz, which is genuinely high-resolution data to pick apart after a session, and a built-in inertia/G-sensor layers vehicle-dynamics data into the log. For a car being developed over a season, that logging is as important as the engine control itself.
Specifications
- Analog voltage inputs (AVI): 11
- Differential engine position inputs: 2 (trigger and home)
- Synchronized pulsed inputs (SPI): 6
- Knock sensor inputs: 2 (dual knock control)
- On-board wideband controller: 1 x NTK / LSU 4.9
- Injection outputs: 8 (peak and hold)
- Ignition outputs: 8
- Digital pulsed outputs (DPO): 6
- Half-bridge outputs (HBO): 6 (8A)
- 25A high-current outputs (HCO): 4
- On-board PDM: yes
- CAN bus networks: 2
- MAP sensor: internal 4-bar
- Inertia / G-sensor: yes
- Drive-by-wire throttle: dual
- Tuning table resolution: 32x32x8 (4D)
- Connectivity: USB-C (USB 2.0), Wi-Fi, Haltech Connect app
- Onboard storage: 128MB
What's Included
- Nexus R3 VCU
- SurLok connectors (red and black)
- Wi-Fi antenna
- Mounting bolts
- USB-C cable
- USB-C dust cap
Options
The Nexus R3 is available with or without the 32-pin and male Deutsch connectors, so you can order it to match how you're building your harness.
Suits
Engines with up to 8 cylinders or up to 4 rotors. Built for racing applications where advanced race features, high-resolution data logging, and integrated power management are required. It's the platform we chose for our own Gridlife GT program, and if it's going in the car we're building to replace a proven Super Touring race car, it'll handle whatever you're building too.
FITMENT
Universal